Trucking

How does an oil company log a forest for 40 years and still keep it pristine?

It lets Wimer Logging do all the heavy lifting, but not without Texaco Ursa engine oils in its equipment. "I wouldn't use anything else," says company president Don Wimer. "Ursa works as hard out here as any of my best loggers." Over 45 million miles of fleet testing says our engine oil will make the cut for you, too. Contact your local Texaco Lubricants Distributor or call 1-800-782-7852. 

Texaco features a complete line of outstanding products suitable for a wide variety of applications in the trucking industry. These products meet or exceed most OEM and industry requirements for their intended uses. 

Ursa Premium TDX Diesel Engine Oil
Ursa Premium TDX Diesel Engine Oil has been formulated exclusively for heavy-duty diesel engines. Its diesel-specific formula delivers high performance advantages. Uncompromising diesel performance that assures maximum engine wear protection, in addition to extended drain interval capabilities beyond conventional mixed-fleet oils. It is available in four viscosity grades, SAE 10W-30, SAE 15W-40, SAE 30 and SAE 40. It meets or exceeds the requirements of virtually every heavy-duty diesel application around the world. 

Ursa Super Plus Engine Oil
The top choice for gasoline and diesel engines operating across a wide temperature range, Ursa Super Plus engine oil is suitable for use in virtually every heavy-duty diesel and gasoline engine. It is available in SAE viscosity grades 15W-40, 10W-30, 10W, 20, 30, 40 and 50. 

Transmission and Drive Train Oil
Texaco's Transmission and Drive Train Oil SAE 10W, 30 and 50 meet the stringent performance requirements of the Caterpillar TO-4 specification, and the SAE 10W and 30 have Allison C-4 approval. 

Multigear EP
Multigear EP 80W-90 and 85W-140 are premium-quality, mineral-based gear oils that offer exceptional thermal stability and seal compatibility. They meet or exceed the requirements of MIL-L-2105E, API GL-3, GL-4 and GL-5 and Mack GO-J. 

Syn-Star GL and Syn-Star TL Lubricants
Syn-Star GL and Syn-Star TL are synthetic-based, wide-range, multigrade automotive gear lubricants that offer exceptional thermal stability and seal compatibility These lubricants can provide improved fuel economy for overall savings. They meet Eaton's extended drain requirements. 

Starplex Greases 
Texaco's series of premium lithium complex, extreme-pressure greases, Starplex greases are designed for heavy-duty equipment and automotive uses. They provide good mechanical and oxidative stability, resist water, help prevent rust and perform well in both high and low temperatures, where a mineral-oil based grease is preferred. 

Starfak Grease
Starfak is a synthetic grease recommended in trailer wheel hub applications, where gear oils are normally recommended but tend to leak. This product also is recommended in centralized greasing systems. 

Texaco Anti-Freeze/Coolants 

Texaco Extended Life Anti-Freeze/Coolants
Texaco Extended Life Coolant System is a revolutionary new breakthrough in heavy duty coolant/antifreeze technology. The patented inhibitors in Texaco Extended Life Coolants offer coolant system protection for 600,000 miles of on-road use (12,000 hours off-highway use) with the addition of only one Texaco Extender package at 300,000 miles or 6,000 hours. Texaco Extended Life Coolants do not contain silicates, borate's, phosphates, nitrates or amines traditionally found in fully formulated heavy duty coolants. 

Based on Texaco's patented carboxylate technology, the system of coolant products includes: 

  • Texaco Extended Life Anti-Freeze/Coolant - A concentrate to adjust the freeze point as required by ambient conditions
  • Texaco Extended Life Prediluted 50/50 Anti-Freeze/Coolant - A mixture of coolant and deionized water
  • Texaco Extender - A prescribed recharge package for one application at 300,000 miles

Texaco Extended Life Coolant System is specifically formulated for heavy duty diesel and natural gas engines. It is also suitable for use in mixed fleet applications.

Texaco Traditional Anti-Freeze/Coolant
Texaco Anti-Freeze/Coolant is a superior quality, single phase, ethylene glycol based product. It is a low silicate, all-purpose coolant designed for use in both heavy duty diesel and automotive engines, particularly those containing aluminum alloys. 

  • Texaco Anti-Freeze/Coolant - Mixes readily with any clean tap water and is compatible with cooling system filters and supplemental additives
  • Texaco Anti-Freeze/Coolant Pre-Mixed 50/50 - A 50/50 mixture of coolant and deionized water

For information on the safe handling and use of these products, please refer to the U.S. Material Safety Data Sheets. For additional information and availability of product, please call 1-800-782-7852.